RSCC offers its clients a wide range of diversified high-quality services and performance, as stated below.
General Contracting
We offer a variety of General Construction activities including: Civil/Architectural, Electrical, Mechanical and Maintenance Works in Refineries, Construction of various facilities in Petrochemical Industries, Construction of Security Fence, Construction of Duct Ban, Construction of Aeration Basin, Pump Station and GRP Piping, Installation of Valves and Fittings in Refineries.
Construction of Industrial Buildings with special high quality technical requirements such as: Aeration Basins, High Voltage Sub Station, Pumping Stations, Work Shop Buildings, Ware Houses, Guard Houses, etc.
Fabrication and installation of various Industrial Pipes such as Carbon Steel Pipes, Stainless Steel Pipes, GRP Pipes, and Reinforced Concrete Pipes and Installation of Valve Chambers.
Concrete Repair
We work in special locations where extreme safety measures and high quality control systems are required. This includes oil refineries and petrochemical industries where important equipments are operating around the clock.
Our major clients are Saudi Aramco, SAMREF, Sabic Industries, Sadaf, Petrokemya, Hadeed, SCECO, MODA, Bechtel, SWCC, and many more.
One of the most common problems in Concrete structures is structural crack. This is perfectly normal and in most cases can be easily repaired.
The method we use for structural crack repair is called Epoxy Injection
What is it?
Epoxy Injection has a variety of uses and is relatively easy to perform. Epoxy is essentially a high strength glue; the repair works on the premise that the epoxy is going to glue the crack back together, filling the void where seepage can occur, as well as repairing the structure.
How it works?
The crack is located, set-up and injected using injection packers, an interior surface seal and either a hand injection gun, or in more severe cases an injection pump. Starting at the base of the crack , Epoxy is injected until a “connection” is made; that is, the Epoxy has filled the void between the bottom port and the port immediately above it. This continues until the crack is completely full. The Epoxy is chosen based on the width of the crack; low, medium, or high viscosity glues.
Water Proofing
RSCC offers a wide range of high quality Industrial Waterproofing Systems and Services to its valued clients throughout Saudi Arabia. The well-equipped and experienced technicians and engineers are devoted to ensure a high standard of services at a very competitive rate.
High technical knowhow to install External / Internal Waterproofing Systems in leaking locations as well as new foundations, basements, swimming pools, car parks, and underground water tanks by utilizing EPDM, PVC, all kinds of Bituminous Membrane and HPDE liners miscellaneous protection systems.
Varied Roofing System Materials that are technically suitable for our local weather conditions stored in our Waterproofing Bank, to be installed by highly trained Waterproofing Technicians under close supervision of qualified and experienced engineers.
High quality lightweight foam concrete as heat insulation with the latest machinery and qualified technicians offer guaranteed insulation that minimizes heat and noise.
Additional expertise is available to insulate roofs with quality materials on job sites. This operation requires the highest degrees of precision and technical knowhow, which are offered by our company.
Industrial Coating
RSCC is specialized in Industrial Coating & flooring, and therefore its market share is growing rapidly. It is RSCC's commitment to introduce the top notch services, modern technologies and improved protective coating to facilitate its valued customers.
RSCC has been using a unique method for surface preparation for several years. Our technique is ideal for removal of contaminates and old coatings from surfaces such as steel, concrete, asphalt, etc. With its various floor surfaces, each surface performs a specific function, for example skid-resistant surface providing safe areas for pedestrians and vehicle etc.
RSCC’s Dry Blast System* enables clients to tailor all types of surfaces to suit their particular requirements. The Dry Blast System can clean texture and prepare concrete, asphalt, stone and steel.
Fire Proofing
RSCC utilizes a variety of Fireproofing Products from well known international companies. This ensures that we deliver the optimum protection for all steel/structures, industrial equipments and to protect against any possible fire related accidents.
Our Fireproofing activities include sand blasting and priming of steel, cleaning of primed steel, installation of mesh and reinforcement, applications and clean up. The fireproofing thickness is determined based on the required fire rating and choice of application as well as the type and size of the structure. Application areas covered include oil & gas storage tanks, structural columns, beams, other structures, prefabricated panels for cable tray and hanger supports.
The following proprietary cements are utilized by RSCC in applications.
Pyrocrete
Monokote
A cementitious spray-applied material, which simply requires the addition of water on the job site to form a consistent pumpable starry.
* RSCC’s Dry Blast System i.e. Blastrac is environmentally clean and performs an ideal method for surface preparation with minimum disturbance to the client.
Plant Maintenance
With its qualified manpower, RSCC provides Industrial Plant Maintenance Services in Mechanical, Electrical, Instrumentation and other related fields during normal operations and turnarounds.
Refineries
Petrochemical Plants
Desalination Plants
Power Plants
Piping Systems
Heat Exchangers
Pressure Vessels
Furnaces including the refractory and insulation repair
Columns and Towers
Pre-fabrication of piping spools
Valves Services
Rotating equipments (Pumps, Compressors and steam Turbines.
Electrical motors, Switches, Panels, Sub-stations
Instrument Systems & Equipment
Hydro-Blasting (Exchangers and Fin Fans)
Sand Blasting
Painting
External Insulation
Scaffolding
Infrastructure Services
RSCC offers its clients a wide range of diversified high-quality services in Infrastructure projects. With our technical expertise along with our affiliation with international companies, we have the strength and flexibility to exceed requirements. Our major clients list in Infrastructure Projects includes the Ministry of Water & Electricity among many others.
Sewer Networks including Lift Stations
Water Networks including Tanks & Pump Stations
Storm Water Networks including Lift Stations
Irrigation Networks including Pump Stations & House Connections
Corrosion Technologies
Working under the flagship of RSCC, Rawabi Corrosion Technology Company (RCTC) is another subsidiary of Rawabi Holding formed in 2006 with a mission to provide a comprehensive and market leading range of Cathodic Protection and corrosion control solutions.
Cathodic Protection (CP) is a specialized engineering technique by which corrosion on buried or immersed metallic surfaces is prevented by the application of a small electric (d.c.) current.
The type of structures which are commonly protected using CP technology includes:
- Buried and Submarine Pipelines and Ancillary Equipment
- Oil and Gas Wells and Production Equipment
- Storage Tanks
- Industrial and Petrochemical Plant Facilities
- Plant Internals
- Jetties
- Sheet Piling
- Marine and Offshore Structures
- Ships' Hulls
RCTC offers a "one-stop" integrated range of services for the application of the most technologically advanced Cathodic Protection Solutions.
Our services includes:
The best cathodic protection system designs deserve the best equipment and materials in order to ensure that the desired system operating life is achieved. At our company, we ensure that we maintain our awareness and knowledge of state of the art developments in Cathodic Protection equipment and materials technology.
But we are also careful not to lose sight of the basics-sometimes the "tried and tested" approach is the most appropriate. We offer our clients a commitment that we will supply the most cost-effective Cathodic Protection materials and equipment, commensurate with meeting the technical needs of the design. Either via or in-house capabilities, or through our technology partners, we are able to offer CP materials and equipment which meet the requirements of the most rigorous regional and international standards, including:
Impressed Current Anodes
- We are the stockists and distributers for the complete range of anotec high silicon cost iron anodes, including the technically advanced 'Centertec' tabular chill cast anodes
- Continuous polymeric anodes
- Mixed metal oxide coated titanium (MMO/Ti) anodes, tabular, ribbon, wire etc.
Sacrificial Anodes
- Magnesium
- Aluminum
- Zinc
System Power Supplies
- Transformers-rectifiers
- Photovoltaic power supplies
System Ancillary Equipment
- Junction boxes
- Test facilities
- Insulting devices
- Reference electrodes
- Remote monitoring modules
The success, or otherwise, of any CP solution begins with the design process; a major premature CP system failure is inadequate and/or inappropriate system design.
At RCTC, we maintain a full time engineering staff with over 165 years of collective accumulated experience in the field of CP engineering. We invest in our people via training and industry recognized professional certification schemes, to ensure that our engineers' knowledge remains at the leading edge of current technology. We turn our extensive knowledge into added value solution for the long term benefit of our clients, and ultimately, the environment.
RCTC undertake the preparation of conceptual and detailed design package which typically includes:
Pre-design Site Assessment
Presentation of Design Concepts
Detailed Engineering Calculations
Bills of Materials and Materials Specifications
Installation, Commissioning and Maintenance Procedures
Provisional or Detailed Cost Presentation
Construction Drawings
With a solid track record and an extensive list of project and client references, RCTC is capable of undertaking the installation, testing and commissioning of Cathodic Protection systems on the most demanding of projects.
Our experienced site engineering teams work to the highest standards of technical excellence to ensure that, from the smallest to the largest project, we exceed client expectations in terms of quality, safety and project schedule needs .
RCTC commitment to its clients doesn't end when the project is complete; we offer a comprehensive range of monitoring and maintenance services to ensure that our system remain in tip-top operating condition.
Of course, many of our clients already have existing, and often much older, Cathodic Protection systems. RCTC is able to carry out in-depth investigation and troubleshooting activities to evaluate any system's effectiveness.
RCTC are able to carry out:
Potential Surveys
Current Distribution Surveys
Current Requirements Testing
Coating Evaluation
Swain Meter Surveys
Re-bar Potential Mapping
Geonics Surveys
Routine System Maintenance and Adjustments
Interference Testing
Location and Mapping of Underground Services
